| DJH
Designs Strip-LOK™ Models |
| Strip-LOK™
Model Information |
Strip-LOK™
Joiners are available in four models, General Purpose (blue),
Heavy Gauge (red) and Long Reach (green) and the Long Reach
Heavy Gauge:
|
General
Purpose Strip-LOK™ Joiner
This unit is used for most common joining operations. It
is characterized by it’s light weight at only 11.8 kg and
by it’s compact size. It is the most economical unit and
is capable of dealing with most strip tear-off situations.
Although it is limited to a maximum strip thickness of 0.7
mm thick soft iron, this is sufficient to deal with the
majority of strip tear-off situations. |
|
Heavy
Gauge Strip-LOK™ Joiner
This unit is capable of joining two
layers of 0.9 mm thick soft iron. Strip tear-off at heavier
Gauges becomes relatively un-common. This unit is as compact
as the General purpose Strip-LOK™ Joiner. |
|
Long
Reach Strip-LOK™ Joiner
Designed for wide strip, the long reach unit has a
reach of 300mm from the strip edge. It is not necessary
to have individual joins across the entire width of the
strip. Considerable stability is created in a joint of two
overlapping sheets via a reasonable overlap region in the
order of 700mm or more. This unit can be used to join strip
widths up to 1500mm. |
|
New!
Long Reach Heavy Gauge Strip-LOK™
Joiner
This
unit has the same heavy duty capabilities of the HG unit
combined with the extended reach of the LR model capable
of joining two layers of 0.9 mm (.035”) thick soft
iron. This unit has a reach of 300mm (11.8”) The Strip-LOK™
Sheet Metal Joiner is a portable strip-joining machine driven
by compressed air. The main use for Strip-LOK™ joiners
is repairing strip tear off situations on modern steel strip
processing lines such as continuous galvanizing and paint
coil coating lines. This is the best advance in economical
efficient and effective strip joining equipment in over
three decades. Already used by major US, Canadian and Australian
steel manufacturers, the Strip-LOK™ Sheet Metal Joiner
is highly appreciated and valued.
|
 |
|
| Strip
Thickness, Capabilities & Specifications |
|
Air Supply:
Air supply pressure should be between 600kPa and 760kPa
(85 – 110 PSI), filtered, dry and lubricated. A supply pressure
of 700kPa is recommended to obtain the capacities as listed
below.
Metal
Limits:
As the supply air pressure increases, so too does the capacity
of the Strip-LOK™ Joiner to join thicker sheets. As a general
rule the following specifications apply for the four models: |
|
|
Light
Gauge |
Heavy
Gauge |
Long
Reach |
Long
Reach
Heavy Gauge |
|
Air
Pressure, kPa (PSI) |
600
– 760 (85-110) |
600
- 760 (85-110) |
600
– 760 (85-110) |
600
– 760 (85-110) |
| Weight,
kg (lb.) |
11.8
(26) |
14.8
(32.6) |
14.5
(32) |
14.5
(32) |
|
Dimensions,
mm (In) L
W
H |
333
(13.1)
155 (6.1)
368 (14.48 ) |
345
(13.58)
175 (6.88)
368 (14.48 ) |
476
(18.74)
155 (6.10)
320 (12.59) |
476
(18.74)
175 (6.88)
320 (12.59) |
|
Throat
Depth, mm (In) |
185
(7.28) |
185
(7.28) |
300
(11.8) |
300
(11.8) |
| Throat
Opening, mm (In) |
8
(.315) |
8
(.315) |
8
(.315) |
8
(.315) |
| Maximum
Strip Thickness mm (In) @ 700kPa (100PSI) |
Soft
Iron 2 @ .7mm (.028)
Hard Iron 2 @ .5mm (.020)
|
Soft
Iron 2 @ .9mm (.035)
Hard Iron 2 @ .6mm (.024)
|
Soft
Iron 2 @ .7mm (.028)
Hard Iron 2 @ .5mm (.020)
|
Soft
Iron 2 @ .9mm (.035)
Hard Iron 2 @ .7mm (.028) |
|
