The Strip-LOK™ Sheet Metal Joiner is a portable strip-joining machine driven by compressed air. The main use for Strip-LOK™ joiners is repairing strip tear off situations on modern steel strip processing lines such as continuous galvanizing and paint coil coating lines. Three models are available to suit most production facilities. This is the best advance in economical efficient and effective strip joining equipment in over three decades. Already used by major US, Canadian and Australian steel manufactures, the Strip-LOK™ Sheet Metal Joiner is highly appreciated and valued.

Repeatable, strong connections can be achieved with a total sheet thickness up to 1.8mm.

Operation is very clean and quiet as the Strip-LOK™ Joiner does not require any consumables other than the two pieces of strip to be joined and no blank is produced.

If joining two sheets of different thick nesses, always place the thicker material on the underside.

Note: A light application of lubricant on the sheets being joined or on the punch will facilitate operation when joining thick sheets near the joiners upper capacity.

Apart from requiring an external compressed air source the Strip-LOK™ Joiner is fully self contained. The Strip-LOK™ Joiner is activated as soon as the trigger is pressed and an automatic cycle of punching and flattening the two layers of metal strip will then commence. The joining cycle will immediately stop as soon as the trigger is released.